Soccer is the most popular sport in the world (Lees and Nolan, 1998). Biomechanics is often applied to soccer to define the characteristics of skills, to gain an understanding of their mechanical effectiveness and to identify factors essential for optimal performance (Lees and Nolan, 1998). The instep kick has been subject to the majority of biomechanical analysis and research (Barfield et al., 2002; Dorge et al., 2002; Lees and Nolan, 2002; Nunome et al., 2002; Shan and Westerhoff, 2005). Subjects are typically instructed to kick a stationary ball at a target from a distance of 8 to 12 m, corresponding to the penalty kick. The instep kick is often used when taking a penalty kick, as a combination of increased ball speed and shot accuracy can be maintained (Lees and Nolan, 1998). Relatively limited scientific research has been undertaken on the technical aspects of soccer penalty kicks (Morya et al., 2003), despite their importance in competition. When taking penalties players may adopt the ‘open loop’ strategy by selecting one corner of the goal to shoot at, ignoring any actions the goalkeeper may take (Kuhn, 1988). Considering the kicking accuracy of modern professional soccer players, and the time required for a goalkeeper to reach the corners of the goal (Morris and Burwitz, 1989), it is surprising that 25% to 33% of penalty kicks in official competitions are missed (Kuhn, 1988). Therefore, there is a need to examine the factors underpinning penalty kick success. Kicking accuracy is an important component of soccer performance, and can be defined as the ability to kick the ball at a specified area (Finnoff et al., 2002). Finnoff et al., 2002 suggested a valid and reliable method of measuring accuracy is to measure the distance of the ball from a specific target. This method provides information on the degree of accuracy as opposed to simply the ability to hit or miss the target. When taking penalty kicks soccer players often approach the ball at an angle (Kellis et al., 2004). In general play, the approach angle is often dependent on the preference of the individual and the kick situation (Lees and Nolan, 1998). An angled approach is commonly used as it orientates the body to gain greater hip and knee flexion range of motion, and enables the kicking leg to be tilted in the frontal plane so that the foot can be placed further under the ball, thus enabling better ball contact (Lees and Nolan, 1998). Isokawa and Lees, 1988 investigated the effects of approach angle on kick kinematics in trainer soccer players. Six male subjects took a one step run up to kick a stationary ball using approach angles of 0°, 15°, 30°, 45°, 60° and 90°. They found an approach angle of 30° to 45° to be optimal, with maximum velocity of the shank achieved with an approach angle of 30° and the maximum ball speed achieved with an approach of 45°. However, they did not investigate the relationship between the approach angle and accuracy, and it appears that no further investigation has been carried out focusing on different approach angles and kick accuracy of recreational soccer players. The majority of kinematic data reported in the literature has been analysed using two-dimensional, sagittal plane methodologies (Lees and Nolan, 1998). Few three-dimensional studies have been conducted (Brown et al., 1993; Levanon and Dapena, 1998; Rodano and Tavana, 1993) but these have not reported movements occurring specifically in the transverse plane, such as pelvic rotation. Increases in pelvic rotation during kicking opens the hips, allowing the pelvis to move through a greater range of motion and prolonging ball contact time, which may have positive benefits for accuracy (Barfield, 1998). Lees and Nolan, 2002 compared kinematics, including pelvic rotation, when kicking for speed or accuracy using a three-dimensional analysis, but they did not alter the approach angle. They found that the increase in ball speed, when kicking for power as opposed to accuracy, was associated with greater hip and knee range of motion. It is clear that the instep kick, corresponding to the penalty kick, has been subject to the majority of biomechanical research in soccer kicking. However, there appears to be gaps in the literature, specifically relating to penalty kick accuracy, suggesting that the skill has not been fully described. The relationship between the approach angle, kinematics and the accuracy of the kick remains unclear. Therefore, the aim of this preliminary study was to examine the effects of approach angle on three-dimensional kinematics and accuracy of penalty kicks. Based on previous research it was hypothesised that an approach angle of 45° would significantly improve kicking accuracy and ball velocity, whilst altering kick kinematics, in particular increasing pelvic rotation. |